What Was On The Rotisserie
1991 Williams Terminator 2 (Customers)
This game is not Elkhart Pinball’s. This game belongs a customer (Mega Play in Town & Country Shopping Center Mishawaka Indiana) who brought in, to be reconditioned and repaired, it will be given a complete check up.
We will first replaced the 3 AA batteries on the CPU and installed 1 lithium battery, we then repaired the GI's circuitry on the power driver board and the wire harness, and put it back to they way it should of been repaired.
We will then remove all playfield plastic, ramps, light bulbs and posts, clean everything removed in
the ultrasonic cleaner, clean the playfield, polish it, replace both flipper assembly, replace all coil sleeves repair gun trigger, and made theTerminator head a new set of eyes, because they were missing. and then reassemble the game, check all switches for proper adjustment, install new light bulbs, check all the bulbs to make sure there are no shorts in the lamp matrix. Then we will install the ramps, playfield plastic, and check switches and lamps again to make sure they work properly.
We at Elkhart Pinball Inc can do as little or as much to a pinball machine, what ever the customer wants.
Before RECONDITIONING After
Before GI Repair
After GI Repair
Before Cleaning in the ultrasonic cleaner After
Thanks for looking
Elkhart Pinball Inc.
Copyright © 2014 , Elkhart Pinball, Inc.